交換機端口操作.doc

《交換機端口操作.doc》由會員上傳分享，免費在線閱讀，更多相關內容在行業資料-天天文庫。

1、QuidwayS2000系列以太網交換機操作手冊端口目錄目錄第1章以太網端口配置1-11.1以太網端口簡介1-11.2以太網端口配置1-11.2.1進入以太網端口視圖1-21.2.2打開/關閉以太網端口1-21.2.3對以太網端口進行描述1-31.2.4設置以太網端口雙工狀態1-31.2.5設置以太網端口速率1-31.2.6設置以太網端口網線類型1-41.2.7設置以太網端口流量控制1-41.2.8設置以太網端口廣播風暴抑制比1-51.2.9設置鎖定端口對應的MAC地址表的老化時間1-51.2.10設置以太網端口的鏈路類型1-61.2.11把當前以太網端口加入到指

2、定VLAN1-71.2.12設置以太網端口缺省VLANID1-71.2.13設置端口的VLAN過濾特性1-81.2.14設置以太網端口環回監測功能1-91.3以太網端口顯示和調試1-91.4以太網端口配置舉例1-101.5以太網端口排錯1-11第2章以太網端口匯聚配置2-12.1以太網端口匯聚簡介2-12.2以太網端口匯聚配置2-12.2.1將一組以太網端口設置為匯聚端口2-12.3以太網端口匯聚顯示和調試2-22.4以太網端口匯聚配置舉例2-22.5以太網端口匯聚配置排錯2-3第3章以太網端口鏡像配置3-13.1以太網端口鏡像簡介3-13.2以太網端口鏡像配置3

3、-13.2.1配置鏡像端口3-13.2.2配置被鏡像端口3-23.2.3配置鏡像端口和被鏡像端口3-23.3以太網端口鏡像顯示和調試3-2iQuidwayS2000系列以太網交換機操作手冊端口第1章以太網端口配置第1章以太網端口配置1.1以太網端口簡介S2026以太網交換機提供24個固定的10/100Base-T以太網端口及2個擴展模塊插槽，支持10/100Base-T模塊、100Base-FX單模模塊、100Base-FX多模模塊及堆疊模塊。S2008以太網交換機提供8個10/100Base-T以太網端口，S2016以太網交換機提供16個10/100Base-T

4、以太網端口。此外兩者還提供2個10/100Base-T上行以太網端口及1個擴展模塊插槽，支持100Base-FX單模模塊和100Base-FX多模模塊。S2403H以太網交換機提供24個10/100Base-T以太網端口、1個100Base-TX上行以太網端口（實際為1個100Base-TX上行端口復用為1個MDIX端口和1個MDI端口，同時只能有1個端口工作）及1個擴展模塊插槽，支持100Base-FX多模模塊和100Base-FX單模模塊。S2000系列以太網交換機支持的以太網端口特性如下：l10/100Base-T以太網端口支持MDI/MDI-X自適應，可以

5、工作在半雙工、全雙工、自協商模式下，可以與其他網絡設備協商確定工作方式和速率，自動選擇最合適的工作方式和速率，從而大大簡化系統的配置和管理。l100Base-FX多模/單模以太網端口的速率及雙工模式不需用戶進行配置，速率為100Mbit/s，工作在全雙工模式下。幾種以太網端口的配置基本相同，下面一起介紹。&說明：S2008/S2016/S2403H以太網交換機的擴展模塊可以通用，S2026以太網交換機的擴展模塊和S2008/S2016/S2403H以太網交換機的不通用。1.2以太網端口配置以太網端口配置包括：l進入以太網端口視圖l打開/關閉以太網端口1-11Qui

6、dwayS2000系列以太網交換機操作手冊端口第1章以太網端口配置l對以太網端口進行描述l設置以太網端口雙工狀態l設置以太網端口速率l設置以太網端口網線類型l設置以太網端口流量控制l設置以太網端口廣播風暴抑制比l設置鎖定端口對應的MAC地址表的老化時間l設置以太網端口的鏈路類型l把當前以太網端口加入到指定VLANl設置以太網端口缺省VLANIDl設置端口的VLAN過濾特性l設置以太網端口環回監測功能1.1.1進入以太網端口視圖要對以太網端口進行配置，首先要進入以太網端口視圖。請在系統視圖下進行下列配置。表1-1進入以太網端口視圖操作命令進入以太網端口視圖inter

7、face{interface_typeinterface_num

8、interface_name}1.1.2打開/關閉以太網端口當端口的相關參數及協議配置好之后，可以使用以下命令打開端口；如果想使某端口不再轉發數據，可以使用以下命令關閉端口。請在以太網端口視圖下進行下列配置。表1-2打開或關閉以太網端口操作命令關閉以太網端口shutdown打開以太網端口undoshutdown缺省情況下，端口為打開狀態。1-11QuidwayS2000系列以太網交換機操作手冊端口第1章以太網端口配置1.1.1對以太網端口進行描述可以使用以下命令設置端口的描述字符串，以區分各個端口。

9、請在以太網