華為配置靜態LACP模式鏈路聚合示例.doc

《華為配置靜態LACP模式鏈路聚合示例.doc》由會員上傳分享，免費在線閱讀，更多相關內容在行業資料-天天文庫。

1、華為配置靜態LACP模式鏈路聚合示例組網需求如圖所示，在兩臺Switch設備上配置靜態LACP模式鏈路聚合組，提高兩設備之間的帶寬與可靠性，具體要求如下：2012-4-1817:17:13上傳下載附件(11.18KB)配置靜態LACP模式鏈路聚合組網圖2條活動鏈路具有負載分擔的能力。兩設備間的鏈路具有1條冗余備份鏈路，當活動鏈路出現故障鏈路時，備份鏈路替代故障鏈路，保持?jǐn)?shù)據傳輸?shù)目煽啃浴D配置靜態LACP模式鏈路聚合組網圖配置思路采用如下的思路配置靜態LACP模式鏈路聚合：在Switch設備上創建Eth-Trunk，配置Eth-Trunk為靜態LACP模式。將成員接口加入Eth-

2、Trunk。配置系統優先級確定主動端。配置活動接口上限閾值。配置接口優先級確定活動鏈路。數據準備為完成此配置例，需準備如下的數據：兩端Switch設備鏈路聚合組編號。SwitchA系統優先級。活動接口上限閾值。活動接口LACP優先級。操作步驟創建編號為1的Eth-Trunk，配置它的工作模式為靜態LACP模式#配置SwitchA。system-view[Quidway]sysnameSwitchA[SwitchA]interfaceeth-trunk1[SwitchA-Eth-Trunk1]bpduenable[SwitchA-Eth-Trunk1]modela

3、cp-static[SwitchA-Eth-Trunk1]quit#配置SwitchB。system-view[Quidway]sysnameSwitchB[SwitchB]interfaceeth-trunk1[SwitchB-Eth-Trunk1]bpduenable[SwitchB-Eth-Trunk1]modelacp-static[SwitchB-Eth-Trunk1]quit將成員接口加入Eth-Trunk#配置SwitchA。[SwitchA]interfaceethernet0/0/1[SwitchA-Ethernet0/0/1]eth-trun

4、k1[SwitchA-Ethernet0/0/1]quit[SwitchA]interfaceethernet0/0/2[SwitchA-Ethernet0/0/2]eth-trunk1[SwitchA-Ethernet0/0/2]quit[SwitchA]interfaceethernet0/0/3[SwitchA-Ethernet0/0/3]eth-trunk1[SwitchA-Ethernet0/0/3]quit#配置SwitchB。[SwitchB]interfaceethernet0/0/1[SwitchB-Ethernet0/0/1]eth-trunk1[Switch

5、B-Ethernet0/0/1]quit[SwitchB]interfaceethernet0/0/2[SwitchB-Ethernet0/0/2]eth-trunk1[SwitchB-Ethernet0/0/2]quit[SwitchB]interfaceethernet0/0/3[SwitchB-Ethernet0/0/3]eth-trunk1[SwitchB-Ethernet0/0/3]quit在SwitchA上配置系統優先級為100，使其成為LACP主動端[SwitchA]lacppriority100在SwitchA上配置活動接口上限閾值為2[SwitchA]inter

6、faceeth-trunk1[SwitchA-Eth-Trunk1]maxactive-linknumber2[SwitchA-Eth-Trunk1]quit在SwitchA上配置接口優先級確定活動鏈路[SwitchA]interfaceethernet0/0/1[SwitchA-Ethernet0/0/1]lacppriority100[SwitchA-Ethernet0/0/1]quit[SwitchA]interfaceethernet0/0/2[SwitchA-Ethernet0/0/2]lacppriority100[SwitchA-Ethernet0/0/2]quit

7、驗證配置結果#查看各Switch設備的Eth-Trunk信息，查看鏈路是否協商成功。[SwitchA]displayeth-trunk1Eth-Trunk1'sstateinformationis:Local:LAGID:1WorkingMode:STATICPreemptDelay:DisabledHasharithmetic:AccordingtoSA-XOR-DASystemPriority:100SystemID:00e0-fca8-0417LeastActive-lin