資源描述：
《通信局（站）低壓配電系統用電涌》由會員上傳分享，免費在線閱讀，更多相關內容在行業資料-天天文庫。
1、通信局（站）低壓配電系統用電涌保護器檢驗實施細則10目錄1編制依據及適用范圍····························································································12引用標準··················································································································13檢驗項目及技術要求··········
2、···················································································13.1檢驗項目及技術要求·····················································································13.2對各種類型SPD檢測項目·········································································7
3、4檢驗方法··················································································································95抽樣·························································································································95.1抽樣基數···················
4、······················································································95.2樣品數量·········································································································96質量判定··································································
5、···············································9106.1通信局（站）低壓配電系統用電涌保護器監督總體的檢驗項目和質量判定·····················································································································96.2判定準則·····························································
6、·············································910通信局（站）低壓配電系統用電涌保護器檢驗實施細則1編制依據及適用范圍本實施細則依據YD/T1235.1-2002《通信局（站）低壓配電系統用電涌保護器技術要求》編制。本細則適用于通信局（站）低壓配電系統用電涌保護器的質量檢驗。2引用標準GB/T4942-1993低壓電器外殼防護等級（eqvIEC60947:1988）YD/T1235.2-2002通信局（站）低壓配電系統用電涌保護器測試方法3檢驗項目及技術要求3.1檢驗項目及技術要求（見表1至
7、表10）表1檢驗項目及技術要求序號項目名稱技術要求1外觀質量a)電涌保護器表面應平整、光潔、無劃傷、無裂痕及變形，緊固件應牢固，顏色應均勻無明顯差異。b)標志應完整清晰、耐久可靠，內容完全，且銘牌不應出現移動和任何翹曲現象。2保護模式交流SPD必須具備N-PE、L-PE或L-N-PE的保護模式；直流SPD必須具備V+-V-的保護模式。交流SPD宜具備L-N的保護模式；直流SPD宜具備V+-PE或V--PE的保護模式。3分離裝置SPD在故障或失效時，應有與電源系統永久斷開的分離裝置。4告警功能SPD正?；蚬收蠒r，應有能正確表示其狀態的標志
8、或指示燈。SPD宜具備遠程集中監測或集中告警的接口。5接線端子連接導體的能力SPD的接線端子除應符合GB17464的要求外，其連接導線的能力還應符合表2或表3的要求。106最大持續運行電壓在70±3℃的試驗
